FSQ
Maritime/Offshore
Support, repair and installation for maritime projects
The FSQ team can mobilize to vessels and maritime installations when repairs must be completed quickly, correctly and with clear reporting to the customer.
Contact us about a maritime projectWhat we offer
Maritime and offshore services
Work is planned around access, materials, time and documentation requirements, so each project can be carried out efficiently onboard or prepared in the workshop.
Onboard repair
Mobile response for vessels where the team can carry out installation, fitting and repair directly on the job.
Scrubber and exhaust
Repairs and steel/pipework on scrubber-related installations and associated maritime systems. Work is performed according to relevant WPQR/WPS procedures when certified welding is required.
View scrubber repair methodPipework
Handling of pipes up to 28" and welding according to relevant WPQR/WPS procedures.
Daily reporting
The customer is kept informed throughout the project, so progress, clarifications and next steps remain clear.
Scrubber and exhaust
WPQR/WPS are part of the welding work
For scrubber, exhaust and pipe repairs, FSQ works according to relevant WPQR/WPS procedures for material, welding process and customer documentation requirements.
Drone inspection
Inspection that saves time, access and unnecessary risk
When access, safety or time makes traditional inspection difficult, FSQ can use approved and certified drone pilots for fast visual documentation in scrubbers, funnels, tanks and confined spaces.
Documented scrubber repair
WPQR 131 vs WPQR 141 — choose the process by the required result
The comparison shows why WPQR 131 can be a strong solution for scrubber repairs: documented welding, high productivity, correct filler match and focus on longer service life.
Hydraulic service
Overhaul of hydraulic cylinders for maritime projects
FSQ can assist with dismantling, inspection, overhaul and assembly of hydraulic cylinders, helping equipment return safely to operation.
Cylinder housing inspection
Cylinder housing and connections are checked so the overhaul can be planned from the actual condition.
Piston rod inspection
Piston rod and surfaces are checked for wear, damage and sealing conditions before assembly.
Seals and assembly
Seals, guides and sliding surfaces are handled with focus on tightness and reliable operation.
Controlled assembly
Components are assembled under control so the cylinder can operate reliably after service.
Ready for operation
The overhauled hydraulic cylinder is prepared for installation and continued use on the maritime installation.
Maritime repair
Shell plate repair with preparation and installation
Hull and shell plate repairs require safe access, component fitting and documented execution, so the work can be carried out efficiently at the vessel or shipyard.
Repair at the vessel side
Access, shielding and execution are planned around vessel conditions and the customer timeline.
Access and preparation
Internal inspection
Prepared plate component
Fitting before installation
Project photos
Scrubber installation, crane repair and maritime service
Selected photos from maritime projects where FSQ has supported customers with installation, repair, testing and practical coordination at vessels and shipyards.
Scrubber installation
FSQ assisted the customer with installation and practical handling at the vessel.
Crane repair
Repair planned around access, lifting conditions and the customer timeline.
Scrubber at shipyard
FSQ assisted the customer with installation and handling of scrubber components at the shipyard.
Engine room repair
Onboard work where access, safety and operation are coordinated closely with the customer.
Cargo manifold welding
Welding carried out on a cargo manifold onboard a tanker with focus on access, quality and operation.
Cooling water manifold
Manifold fabricated from measurements and then installed so the solution matched the actual conditions.
Gangway repair
Repair carried out while the vessel is in service, with focus on access, safety and operation during the work.
Onboard service
When the task requires a fast response, we can assist onboard by agreement and plan.
Workflow
From urgent task to completed repair
The team can work on site or use the workshop for preparation, production and readying before the work is completed onboard.
Assessment
We clarify damage, materials, access conditions and timeline.
Mobilization
Team, equipment and materials are prepared for workshop or vessel.
Execution
The work is carried out with ongoing status updates and focus on quality.
Materials and quality
Certified welding for maritime environments
Welding is performed according to WPQR/WPS procedures, and the team works with materials commonly used in maritime repairs.
Materials
- Mild steel S235-S355
- Stainless steel A2-A4
- SMO stainless steel
- Aluminium
Welding processes
- 111 — Manual MMA
- 131 — MIG
- 135 — MAG solid wire
- 136 — MAG flux core
- 138 — MAG metal core
- 141 — TIG
Contact
Tell us about the maritime project
Send a short description of the task, vessel, location and requested timeline.
Flemming Bach Senior Repair Superintendent +45 4215 8810 Service@fsq.dk NyMøllevej 13, DK-9240 CVR: 45424766